|
Buy this item and earn 144.95 points valued at $7.25. Blackstone's positive displacement solenoid driven pumps use a
minimum number of moving parts, therefore reducing the chance of
mechanical failure. Part wear and oiling associated with motor driven
pumps (ball-bearings, gear drives and cams) are not present in these
pumps. Blackstone pumps are more accurate than standard pumps with the
positive displacement design ensuring each stroke is identical to the
strokes before and after it, thus keeping the flow rate consistent.
A
wide range of Blackstone pumps with different dosing capacities is
available for your specific dosing needs. Each pump is supplied with
discharge and suction valves.
HANNA® also produces polyethylene tubing,
injection fittings, ceramic weights and replacement parts.
Flow Rates:
BL 1.5 = 1.5 LPH
BL 3 = 2.9 LPH
BL 5 = 5.0 LPH
BL 7 = 7.6 LPH
BL 10 = 10.8 LPH
BL 15 = 15.2 LPH
BL 20 = 18.3 LPH
Order Information:
The BL Series Pump is supplied with pump & power supply
| Max Output |
See Order Info Chart |
| Pump Casing |
fiber-reinforced polypropylene |
| Materials |
pumphead in PVDF (PolyVinyliDene Fluoride), diaphram
in PTFE (PolyTetraFluoro-Ethylene), glass ball valves and O-rings in
Viton®
polyethylene 5 x 8 mm tubing and 2/8" injection fitting |
| Self Priming |
max height: 1.5 m (5 feet) |
| Power Supply |
See Order Info Chart |
| Max Power Consumption |
approx 200 W |
| Protection |
IP65 |
| Environment |
0 to 50°C (32 to 122°F); RH max 95% non-condensing |
| Dimensions |
165 x 194 x 121 mm (6.5 x 7.6 x 4.8") |
| Weight |
approx. 3 kg (6.6 lb.) |
| Available Options: |
| Flow Rate: |
|
|
